Read more



MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem with Raspberry Pi Zero W with Firmware V4.1.5 UHF Supports DMR YSF NXDN DSTAR P25
I can preload this with PI-STAR or WPSD and you will need to fill your info and activate it on your network. price/$85

Or you will receive a formatted SD Card

I test each one of these before shipment on Pi-Star (DMR) I can not test on any other mode because I only own DMR radios

 MMDVM Hotspot Spot Radio Station Wi-Fi Digital Voice Modem with Raspberry Pi Zero W with Firmware V4.1.5 UHF Supports DMR NXDN DSTAR P25 YSF
Includes 32GB Lexar micro SD card.

The hotspot is a combination of 2 Raspberry devices.

1:Raspberry Pi Zero W and 32GB Lexar Micro SD card to load the program of your choice.
 
Raspberry Pi Zero W and Zero WH are extensions of the Pi Zero family and feature wireless LAN and BLUETOOTH® connectivity. Both modules offer Bluetooth 4.1, Bluetooth Low Energy (BLE), and 802.11 b/g/n wireless LAN. Additional features include a Broadcom BCM2835 application processor, 1GHz single-core CPU, and 512MB RAM. The Zero WH module includes a pre-soldered GPIO header, which eliminates the need to solder pins to the header manually and makes it easier to start prototyping. Both the Raspberry Pi Zero W and Zero WH come with a mini HDMI port and micro USB on-the-go (OTG) port, micro-USB power, CSI camera connector, and more.
FEATURES
Extension of the Pi Zero family
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)
Broadcom BCM2835 application processor
1GHz, single-core CPU
512MB RAM
Mini-HDMI port and micro-USB OTG port
Micro-USB power
HAT-compatible 40-pin header
WH version includes pre-soldered GPIO header
Composite video and reset headers
CSI camera connector.

2: MMDVM Hotspot Hat for Raspberry Pi Zero.

- High performance 32-bit ARM processor
- Fully assembled and tested
- Supports DMR,YSF,D*,P25,NXDN
- Onboard LEDs to show status (PWR/SVC/COS/PTT/D*/DMR/YSF/P25/NXDN)
- Up to 10mW RF power
- SMA antenna connector,UHF antenna included
- Mounts cleanly on all current Raspberry Pi's including the Pi Zero
- Support and tested with PI-STAR and WPSD software's
- UHF430-450MHz,433MHZ and 900MHz